Open Positions

Mold Repair (Mold Repair)

Restore and repair fiberglass hull molds with precision. Work involves sanding, buffing, and detailed bodywork using power tools. Requires strong attention to detail, upper body strength, and skill in fiberglass repair methods.

Touchup (Final Finishing and Decks)

Perform sanding, defect repair, buffing, and minor fiberglass work under time pressure. Requires attention to detail and experience with sanding tools. A steady hand and a sharp eye are essential.

Glass in (Hulls)

Build and install stringers into boat hulls using fiberglass, resin, and catalyst. Ensure proper placement, consistent lamination, and smooth finishes. Requires attention to detail, equipment care, and safe handling of materials. Experience with hand tools, resin spraying, and fiberglass work preferred.

Build Up (Hulls)

Apply resin and fiberglass to hull molds by hand using spray guns and rollers. Ensure smooth, consistent lamination with no air voids. Responsibilities include equipment checks, surface prep, and tool maintenance. Attention to detail and fiberglass handling skills required.

Build Up (Decks)

Responsible for applying resin and kitted fiberglass to deck molds by hand with a roller as described on the deck build-up chart.  The laminate should be consistent in thickness without air voids or knots using the proper amount of resin.

Wiring (Assembly A2)

Install and connect wiring to instrument and accessory panels to ensure proper operation of mechanical components. Requires precision, focus, and familiarity with electrical systems.

Hull Prep (Assembly A1)

Install wiring, hoses, pumps, hydraulics, and hardware in the boat hull following work instructions. Tasks include measuring, drilling, sealing, and assembling components with care. Familiarity with hand tools and attention to detail are helpful.